In geometry, a diagonal is a line segment joining two vertices of a polygon or polyhedron, when those vertices are not on the same edge. Informally, any sloping line is called diagonal. The word diagonal derives from the ancient Greek διαγώνιος diagonios, "from corner to corner" (from διά- dia-, "through", "across" and γωνία gonia, "corner", related to gony "knee"); it was used by both Strabo and Euclid to refer to a line connecting two vertices of a rhombus or cuboid, and later adopted into Latin as diagonus ("slanting line").
Polygons
As applied to a polygon, a diagonal is a line segment joining any two non-consecutive vertices. Therefore, a quadrilateral has two diagonals, joining opposite pairs of vertices. For any convex polygon, all the diagonals are inside the polygon, but for re-entrant polygons, some diagonals are outside of the polygon.
Any n-sided polygon (n ≥ 3), convex or concave, has n ( n − 3 ) 2 {\displaystyle {\tfrac {n(n-3)}{2}}} total diagonals, as each vertex has diagonals to all other vertices except itself and the two adjacent vertices, or n − 3 diagonals, and each diagonal is shared by two vertices.
In general, a regular n-sided polygon has ⌊ n − 2 2 ⌋ {\displaystyle \left\lfloor {\frac {n-2}{2}}\right\rfloor } distinct diagonals in length, which follows the pattern 1,1,2,2,3,3... starting from a square.
|
|
|
|
|
Regions formed by diagonals
In a convex polygon, if no three diagonals are concurrent at a single point in the interior, the number of regions that the diagonals divide the interior into is given by5
( n 4 ) + ( n − 1 2 ) = ( n − 1 ) ( n − 2 ) ( n 2 − 3 n + 12 ) 24 . {\displaystyle {\binom {n}{4}}+{\binom {n-1}{2}}={\frac {(n-1)(n-2)(n^{2}-3n+12)}{24}}.}For n-gons with n=3, 4, ... the number of regions is
1, 4, 11, 25, 50, 91, 154, 246...This is OEIS sequence A006522.6
Intersections of diagonals
If no three diagonals of a convex polygon are concurrent at a point in the interior, the number of interior intersections of diagonals is given by ( n 4 ) {\displaystyle \textstyle {\binom {n}{4}}} .78 This holds, for example, for any regular polygon with an odd number of sides. The formula follows from the fact that each intersection is uniquely determined by the four endpoints of the two intersecting diagonals: the number of intersections is thus the number of combinations of the n vertices four at a time.
Regular polygons
See also: Quadrilateral § Diagonals, Hexagon § Convex equilateral hexagon, and Heptagon § Diagonals and heptagonal triangle
Although the number of distinct diagonals in a polygon increases as its number of sides increases, the length of any diagonal can be calculated.
In a regular n-gon with side length a, the length of the xth shortest distinct diagonal is:
sin ( π ( x + 1 ) n ) csc ( π n ) ⋅ a {\displaystyle \sin \left({\frac {\pi (x+1)}{n}}\right)\csc \left({\frac {\pi }{n}}\right)\cdot a}This formula shows that as the number of sides approaches infinity, the xth shortest diagonal approaches the length ( x + 1 ) a {\displaystyle (x+1)a} . Additionally, the formula for the shortest diagonal simplifies in the case of x = 1:
sin ( 2 π n ) csc ( π n ) ⋅ a = 2 cos ( π n ) ⋅ a {\displaystyle \sin \left({\frac {2\pi }{n}}\right)\csc \left({\frac {\pi }{n}}\right)\cdot a=2\cos \left({\frac {\pi }{n}}\right)\cdot a}If the number of sides is even, the longest diagonal will be equivalent to the diameter of the polygon's circumcircle because the long diagonals all intersect each other at the polygon's center.
Special cases include:
A square has two diagonals of equal length, which intersect at the center of the square. The ratio of a diagonal to a side is 2 ≈ 1.414. {\displaystyle {\sqrt {2}}\approx 1.414.}
A regular pentagon has five diagonals all of the same length. The ratio of a diagonal to a side is the golden ratio, 1 + 5 2 ≈ 1.618. {\displaystyle {\frac {1+{\sqrt {5}}}{2}}\approx 1.618.}
A regular hexagon has nine diagonals: the six shorter ones are equal to each other in length; the three longer ones are equal to each other in length and intersect each other at the center of the hexagon. The ratio of a long diagonal to a side is 2, and the ratio of a short diagonal to a side is 3 {\displaystyle {\sqrt {3}}} .
A regular heptagon has 14 diagonals. The seven shorter ones equal each other, and the seven longer ones equal each other. The reciprocal of the side equals the sum of the reciprocals of a short and a long diagonal.
Polyhedrons
See also: Face diagonal and Space diagonal
A polyhedron (a solid object in three-dimensional space, bounded by two-dimensional faces) may have two different types of diagonals: face diagonals on the various faces, connecting non-adjacent vertices on the same face; and space diagonals, entirely in the interior of the polyhedron (except for the endpoints on the vertices).
Higher dimensions
N-Cube
The lengths of an n-dimensional hypercube's diagonals can be calculated by mathematical induction. The longest diagonal of an n-cube is n {\displaystyle {\sqrt {n}}} . Additionally, there are 2 n − 1 ( n x + 1 ) {\displaystyle 2^{n-1}{\binom {n}{x+1}}} of the xth shortest diagonal. As an example, a 5-cube would have the diagonals:
|
Its total number of diagonals is 416. In general, an n-cube has a total of 2 n − 1 ( 2 n − n − 1 ) {\displaystyle 2^{n-1}(2^{n}-n-1)} diagonals. This follows from the more general form of v ( v − 1 ) 2 − e {\displaystyle {\frac {v(v-1)}{2}}-e} which describes the total number of face and space diagonals in convex polytopes.9 Here, v represents the number of vertices and e represents the number of edges.
Geometry
By analogy, the subset of the Cartesian product X×X of any set X with itself, consisting of all pairs ( x , x ) {\displaystyle (x,x)} , is called the diagonal, and is the graph of the equality relation on X or equivalently the graph of the identity function from X to X. This plays an important part in geometry; for example, the fixed points of a mapping F from X to itself may be obtained by intersecting the graph of F with the diagonal.
In geometric studies, the idea of intersecting the diagonal with itself is common, not directly, but by perturbing it within an equivalence class. This is related at a deep level with the Euler characteristic and the zeros of vector fields. For example, the circle S1 has Betti numbers 1, 1, 0, 0, 0, and therefore Euler characteristic 0. A geometric way of expressing this is to look at the diagonal on the two-torus S1×S1 and observe that it can move off itself by the small motion (θ, θ) to (θ, θ + ε). In general, the intersection number of the graph of a function with the diagonal may be computed using homology via the Lefschetz fixed-point theorem; the self-intersection of the diagonal is the special case of the identity function.
Notes
External links
Look up diagonal in Wiktionary, the free dictionary.- Diagonals of a polygon with interactive animation
- Polygon diagonal from MathWorld.
References
Harper, Douglas R. (2018). "diagonal (adj.)". Online Etymology Dictionary. https://www.etymonline.com/search?q=diagonal ↩
Strabo, Geography 2.1.36–37 ↩
Euclid, Elements book 11, proposition 28 ↩
Euclid, Elements book 11, proposition 38 ↩
Honsberger (1973). "A Problem in Combinatorics". Mathematical Gems. Mathematical Association of America. Ch. 9, pp. 99–107. ISBN 0-88385-301-9. Freeman, J. W. (1976). "The Number of Regions Determined by a Convex Polygon". Mathematics Magazine. 49 (1): 23–25. doi:10.2307/2689875. JSTOR 2689875. 0-88385-301-9 ↩
Sloane, N. J. A. (ed.). "Sequence A006522". The On-Line Encyclopedia of Integer Sequences. OEIS Foundation. /wiki/Neil_Sloane ↩
Poonen, Bjorn; Rubinstein, Michael. "The number of intersection points made by the diagonals of a regular polygon". SIAM J. Discrete Math. 11 (1998), no. 1, 135–156; link to a version on Poonen's website https://math.mit.edu/~poonen/papers/ngon.pdf ↩
3Blue1Brown (2015-05-23). Circle Division Solution (old version). Retrieved 2024-09-01 – via YouTube.{{cite AV media}}: CS1 maint: numeric names: authors list (link) https://www.youtube.com/watch?v=K8P8uFahAgc ↩
"Counting Diagonals of a Polyhedron – the Math Doctors". https://www.themathdoctors.org/counting-diagonals-of-a-polyhedron/ ↩