Menu
Home
People
Places
Arts
History
Plants & Animals
Science
Life & Culture
Technology
Reference.org
Polybenzimidazole
open-in-new
<h2 id="history">History</h2> <h3>Discovery</h3> <p>Brinker and Robinson first reported aliphatic polybenzimidazoles in 1949.<a class="footnote-ref" id="fnref:2" href="#fn:2"><sup>2</sup></a> However the discovery of aromatic polybenzimidazole, which shows excellent physical and chemical properties, was generally credited to <a href="/facts/Carl_Shipp_Marvel/xUftX4Xk">Carl Shipp Marvel</a> in the 1950s.<a class="footnote-ref" id="fnref:3" href="#fn:3"><sup>3</sup></a> The Material Laboratory of <a href="/facts/Wright_Patterson_Air_Force_Base/6EWFomSD">Wright Patterson Air Force Base</a> approached Marvel. They were looking for materials suitable for <a href="/facts/Drogue_parachute/tjfpn1Ls">drogue parachutes</a> which could tolerate short-time mechanical stress. However, the thermal resistance of all known filaments at that time was inadequate. The original search concentrated on aromatic condensation polymers but the <a href="/facts/Peptide_bond/3FeX8M6q">amide linkage</a> proved to be weak link for the aim of maximal <a href="/facts/Thermal_stability/Tbqa12Iq">thermal stability</a> of the polymer, whereas Marvel's research focused on <a href="/facts/Condensation_polymer/lJHUMx53">condensation polymers</a> with aromatic and <a href="/facts/Heteroaromatic/wK0DzRY6">heteroaromatic</a> <a href="/facts/Repeating_unit/WIxA68X4">repeating units</a>. This progressively led to the discovery of polybenzimidazole. </p> <h3>Development</h3> <p>Its development history can be summarized in the following list:<a class="footnote-ref" id="fnref:4" href="#fn:4"><sup>4</sup></a> </p> <ul><li>In 1961, polybenzimidazole was developed by H. Vogel and C.S. Marvel with anticipation that the polymers would have exceptional thermal and oxidative stability.<a class="footnote-ref" id="fnref:5" href="#fn:5"><sup>5</sup></a></li> <li>Subsequently, in 1963, <a href="/facts/NASA/TIMCV0yV">NASA</a> and the Air Force Materials Lab sponsored considerable work with polybenzimidazole for aerospace and defense applications as a non-flammable and thermally stable textile fiber.<a class="footnote-ref" id="fnref:6" href="#fn:6"><sup>6</sup></a></li> <li>In 1969, the United States Air Force selected polybenzimidazole (PBI) for its superior thermal protective performance after a 1967 fire aboard the <a href="/facts/Apollo_1/aJEvDnBM">Apollo 1</a> spacecraft killed three astronauts.<a class="footnote-ref" id="fnref:7" href="#fn:7"><sup>7</sup></a></li> <li>In the early 1970s USAF laboratories experimented with polybenzimidazole fibers for <a href="/facts/Protective_clothing/DF3oEH6B">protective clothing</a> to reduce aircrew deaths from fires.<a class="footnote-ref" id="fnref:8" href="#fn:8"><sup>8</sup></a></li> <li>In the 1970s, NASA continued to use PBI as part of the astronauts’ clothing on Apollo, <a href="/facts/Skylab/h7v9LWKE">Skylab</a> and numerous space shuttle flights.</li> <li>When <a href="/facts/Skylab/h7v9LWKE">Skylab</a> fell to Earth, the part that survived the re-entry was coated in PBI and thus did not burn up.</li> <li>1980s – PBI was introduced to the fire service,[<i>which?</i>] and through Project Fires an outer shell for turnout gear was developed. PBI Gold fabric was born, consisting of 40% PBI/60% para-aramid. Previous to this, combinations of Nomex, leather, and Kevlar materials were used in the US.</li> <li>1983 – A unique production plant goes on-line and PBI <a href="/facts/Fibers/ttkxAFBu">fibers</a> become commercially available.</li> <li>1990s – Short-cut PBI fibers are introduced for use in automotive braking systems. PBI staple fiber enters the aircraft market for seat fire blocking layers.</li> <li>1992 – Lightweight PBI fabrics are developed for flame-resistant workwear for electric utility and petrochemical applications.</li> <li>1994 – PBI Gold fabric is engineered in black and was specified by the <a href="/facts/New_York_City_Fire_Department/cyAjE4NA">FDNY</a>.</li> <li>2001 – After the terrorist attacks on September 11, many of the 343 fire fighters killed were only identifiable by their TenCate PBI Turnout Gear.</li> <li>2003 – PBI Matrix was commercialized and introduced as the next-generation PBI for firefighter turnout gear.</li></ul> <h2 id="properties">Properties</h2> <h3>General physical properties</h3> <p>PBI are usually yellow to brown solid infusible up to 400 °C (752 °F) or higher.<a class="footnote-ref" id="fnref:9" href="#fn:9"><sup>9</sup></a> The <a href="/facts/Solubility/kLE9h3Jb">solubility</a> of PBI is controversial, because while most of the linear PBI are partly or entirely dissolved in strong protonic acids (for instance, <a href="/facts/Sulfuric_acid/Wom6fymJ">sulfuric acid</a> or <a href="/facts/Methanesulfonic_acid/T78pbCLb">methanesulfonic acid</a>), contradictory observations of solubilities have been recorded among weaker acids like formic acid, and in non-acidic media, such as the aprotic amide-type solvents and dimethyl sulfoxide. For example, one type of PBI prepared in phosphoric acid was found by Iwakura et al.<a class="footnote-ref" id="fnref:10" href="#fn:10"><sup>10</sup></a> to be partially soluble in <a href="/facts/Formic_acid/o6cFsbNc">formic acid</a>, but completely soluble in <a href="/facts/Dimethyl_sulfoxide/T4HSYfuC">dimethyl sulfoxide</a> and <a href="/facts/Dimethylacetamide/X4VpNaPw">dimethylacetamide</a>, whereas Varma and Veena<a class="footnote-ref" id="fnref:11" href="#fn:11"><sup>11</sup></a> reported the same polymer type to dissolve completely in <a href="/facts/Formic_acid/o6cFsbNc">formic acid</a>, yet only partially in <a href="/facts/Dimethyl_sulfoxide/T4HSYfuC">dimethyl sulfoxide</a> or <a href="/facts/Dimethylacetamide/X4VpNaPw">dimethylacetamide</a>. </p> <h3>Thermal stability</h3> <p><a href="/facts/Imidazole/5MybM6Hh">Imidazole</a> derivatives are known to be stable compounds. Many of them are resistant to the most drastic treatments with acids and bases and not easily oxidized. The high decomposition temperature and high stability at over 400 °C suggests a polymer with benzimidazole as the repeating unit may also show high heat stability. Polybenzimidazole and its <a href="http://chemwiki.ucdavis.edu/Organic_Chemistry/Hydrocarbons/Aromatics">aromatic derivatives</a> can withstand temperatures in excess of about 500 °C (932 °F) without softening and degrading. The polymer synthesized from <a href="/facts/Isophthalic_acid/82fkFEYw">isophthalic acid</a> and <a href="/facts/3,3%27-Diaminobenzidine/JIo8InwD">3,3'-Diaminobenzidine</a> is not melted by exposure to a temperature of 770 °C (1,420 °F) and loses only 30% of its weight after exposure to high temperature up to 900 °C (1,650 °F) for several hours.<a class="footnote-ref" id="fnref:12" href="#fn:12"><sup>12</sup></a> </p> <h3>Flame resistance</h3> <p>A property of a material needed to be considered before putting it into application is <a href="/facts/Flammability/1QexTQ4T">flammability</a>, which demonstrates how easily one material can ignite and combust under the realistic operating conditions. This may affect its application in varied areas, such as in construction, plant design, and interior decoration. A number of quantitative assessments of flammability exist, such as <a href="/facts/Limiting_oxygen_index/q39AkeQs">limiting oxygen index</a> (LOI), i.e., the minimum oxygen concentration at which a given sample can be induced to burn in a candle like configuration. These permit estimation of a 'ranking' comparison of <a href="/facts/Flammability/1QexTQ4T">flammability</a>. Data shows that PBI is a highly flame resistant material compared to common polymers.<a class="footnote-ref" id="fnref:13" href="#fn:13"><sup>13</sup></a> </p> <h3>Moisture regain</h3> <p>PBI's <a href="/facts/Moisture_regain/XGeB64bC">moisture regain</a> is useful in protective clothing; this makes the clothing comfortable to wear, in sharp contrast to other synthetic polymers. The moisture regain ability of PBI (13%) compares favorably with cotton (16%).<a class="footnote-ref" id="fnref:14" href="#fn:14"><sup>14</sup></a> </p> <h2 id="synthesis">Synthesis</h2> <p>The preparation of PBI(IV) can be achieved by <a href="/facts/Condensation_reaction/wMG0F6La">condensation reaction</a> of diphenyl isophthalate (I) and 3,3’,4,4’-tetraaminodiphenyl (II) (Figure 1). The spontaneous cyclization of the intermediately formed amino-amide (III) to PBI (IV) provided a much more stable amide linkage. This synthetic method was first used in the lab and later developed into a two step process. In a typical synthesis, starting materials were heated at 270 °C (518 °F) for 1.5 h to form the PBI prepolymer and later the prepolymer was heated at 360 °C (680 °F) for another 1 h to form the final commercial-grade product. </p><p>The reason for the second step is due to the formation of the by-product phenol and water in the first step creating voluminous foam,<a class="footnote-ref" id="fnref:15" href="#fn:15"><sup>15</sup></a> which leads to the volume expansion of several times of the original. This is the issue that must be considered by the industrial manufacturers. This foam can be reduced by conducting the polycondensation at a high temperature around 200 °C (392 °F) and under the pressure of 2.1–4.2 MPa (300–610 psi).<a class="footnote-ref" id="fnref:16" href="#fn:16"><sup>16</sup></a> The foam can also be controlled by adding high boiling point liquids such as diphenylether or cetane to the polycondensation. The boiling point can make the liquid stay in the first stage of polycondensation but evaporate in the second stage of solid condensation. The disadvantage of this method is that there are still some liquids which remain in the PBI and it is hard to remove them completely.<a class="footnote-ref" id="fnref:17" href="#fn:17"><sup>17</sup></a> </p> <p>While changing the tetramine and acid, a number of different aromatic poly benzimidazoles have been synthesized. The following table (Table 1)<a class="footnote-ref" id="fnref:18" href="#fn:18"><sup>18</sup></a> lists some of the combination possibilities that have been synthesized in the literature. Some of the combinations have actually been translated into fibers on a small scale. However, the only significant progress that has been made to date is with PBI. </p> Table 1. Other monomers which form derivatives of polybenzimidazole<table><tbody><tr><th>R(Tetramine)</th><th>R'(acid))</th></tr><tr><td>Benzene</td><td>Benzene</td></tr><tr><td>Diphenyl</td><td>Diphenyl</td></tr><tr><td>Diphenylether</td><td>Diphenylether</td></tr><tr><td>Diphenylsulfone</td><td>Naphthalene</td></tr><tr><td>Naphthalene</td><td>Pyridine</td></tr><tr><td>Pyridine</td><td>Anthraquinone</td></tr><tr><td>Anthraquinone</td><td>Ferrocene</td></tr><tr><td></td><td>Anthracene</td></tr></tbody></table> <p>The most common form of PBI used in industry is the fiber form. The fiber process following polymerization is shown in the figure. The polymer is made into solution using dimethylacetamide as solvent. The solution is filtered and converted into fiber using a high temperature dry-spinning process. The fiber is subsequently drawn at elevated temperature to get desired mechanical properties. It is then sulfonated and made into staple using conventional crimping and cutting techniques. </p> <h2 id="applications">Applications</h2> <p>Before the 1980s, the major applications of PBI were fire-blocking, thermal protective apparel, and reverse osmosis membranes. Its applications became various by the 1990s when molded PBI parts and microporous membranes were developed. </p> <h3>Protective apparel</h3> <p>The thermal stability, flame resistance, and moisture regain of PBI and its conventional textile processing character enable it to be processed on conventional staple fiber textile equipment. These characteristics lead to one of the most important applications of PBI: protective apparel. PBI filaments were fabricated into protective clothing like firefighters' gear and astronauts' suits. PBI filaments are dry spun from dimethylacetamide containing lithium chloride. After washing and drying the resulting yarn is golden brown. </p> <p>PBI fiber is an excellent candidate for applications in severe environments due to its combination of thermal, chemical and textile properties. Flame and thermal resistance are the critical properties of protective apparel. This kind of apparel applications includes firefighter's protective apparel, astronaut's suits,<a class="footnote-ref" id="fnref:19" href="#fn:19"><sup>19</sup></a> aluminized crash rescue gear, industrial worker's apparel, and suits for racing car drivers.<a class="footnote-ref" id="fnref:20" href="#fn:20"><sup>20</sup></a> </p> <p>PBI-blended fabrics have been the preferred choice of active fire departments across the Americas and around the world for over 30 years. From New York, San Diego, San Francisco, Philadelphia, Seattle, Nashville to São Paulo, Belin, Hong Kong and many more. The high decomposition temperature at which PBI starts to degrade is 1,300 °F (704 °C), exceeding Nomex/Kevlar blends (Nomex being at 700 °F (371 °C) and Kevlar at 1,100 °F (593 °C)), thus offering superior break-open and thermal protection. </p> <h3>PBI membranes</h3> <p>PBI has been used as the membranes for various separation purposes. Traditionally, PBI was used semi-permeable membranes for electrodialysis, reverse osmosis or ultrafiltration.<a class="footnote-ref" id="fnref:21" href="#fn:21"><sup>21</sup></a> PBI has also been used for gas separations.<a class="footnote-ref" id="fnref:22" href="#fn:22"><sup>22</sup></a><a class="footnote-ref" id="fnref:23" href="#fn:23"><sup>23</sup></a> due to its close chain packing since PBI has rigidity structure and strong hydrogen bonding. PBI membranes are dense, with very low gas permeability. To be proton conductive, PBI usually is doped with acid. The higher level of the acid doping, the more conductive PBI is. But one problem raised is the mechanical strength of PBI decreases at the same time. The optimum doping level is thus a compromise between these two effects. Thus, multiple methods such as ionic cross-linking, covalent cross-linking and composite membranes<a class="footnote-ref" id="fnref:24" href="#fn:24"><sup>24</sup></a> have been researched to optimize the doping level at which PBI has an improved conductivity without sacrificing mechanical strength. Sulfonated partially fluorinated arylene main chain polymer exhibit good thermal and extended stability, high proton conductivities, less acid swelling, reasonable mechanical strength.<a class="footnote-ref" id="fnref:25" href="#fn:25"><sup>25</sup></a> </p> <h3>Molded PBI resin</h3> <p>Molded PBI <a href="/facts/Resin/r1uVThQ8">resin</a> has compressive <a href="/facts/Strength_of_materials/CE77cUcB">strength</a> 58 ksi (400 MPa) and a tensile strength of 23 ksi (160 MPa), a flexural strength of 32 ksi (220 MPa), a ductile compressive failure mode and the <a href="/facts/Density/92p6hh9I">density</a> of 1.3 g/cm3.<a class="footnote-ref" id="fnref:26" href="#fn:26"><sup>26</sup></a> The PBI resin comprises a recurring structural unit represented by the following figure. </p> <p>According to the Composite Materials Research Group at the <a href="/facts/University_of_Wyoming/lSXltuH1">University of Wyoming</a>, PBI resin parts maintain significant <a href="/facts/Tensile/waNGYp3a">tensile</a> properties and <a href="/facts/Compressive_strength/qVWDPDvo">compressive strength</a> to 700 °F (371 °C). PBI resin parts are also potential materials for the chemical process and oil recovery industries which have demands of <a href="/facts/Thermal_stability/Tbqa12Iq">thermal stability</a> and <a href="/facts/Chemical_resistance/qp9gGPMQ">chemical resistance</a>. In these areas, PBI resin has been successfully applied in demanding sealing, for instance, valve seats, stem seals, hydraulic seals and backup rings. In the aerospace industry, PBI resin has high strength and short term high temperature resistance advantages. In the industrial sector, PBI resin's high dimensional stability as well as retention of electrical properties at high temperature make it used as a thermal and electrical <a href="/facts/Insulator_(electricity)/SfSXkrh5">insulator</a>.<a class="footnote-ref" id="fnref:27" href="#fn:27"><sup>27</sup></a> </p> <h3>Fuel cell electrolyte</h3> <p>Polybenzimidazole is able to be complexed by <a href="/facts/Strong_acids/vJ4rj6Lu">strong acids</a> because of its basic character. Complexation by <a href="/facts/Phosphoric_acid/l6NbwyCv">phosphoric acid</a> makes it a proton <a href="/facts/Electrical_conductor/BSuyupLP">conductive material</a>.<a class="footnote-ref" id="fnref:28" href="#fn:28"><sup>28</sup></a> This renders the possible application to high temperature fuel cells. Cell performance test show a good stability in performance for 200 h runs at 150 °C (302 °F). However, gel PBI membranes made in the PPA Process show good stability for greater than 17,000 hours at 160 °C (320 °F).<a class="footnote-ref" id="fnref:29" href="#fn:29"><sup>29</sup></a> Application in direct <a href="/facts/Methanol/EIfpoNCg">methanol</a> <a href="/facts/Fuel_cells/UcMYnCW3">fuel cells</a> may be also of interest because of a better selectivity water/methanol compared to existing membranes. Wainright, Wang et al. reported that PBI doped with <a href="/facts/Phosphoric_acid/l6NbwyCv">phosphoric acid</a> was utilized as a high temperature <a href="/facts/Fuel_cell/UcMYnCW3">fuel cell</a> electrolyte.<a class="footnote-ref" id="fnref:30" href="#fn:30"><sup>30</sup></a> The doped PBI high temperature <a href="/facts/Fuel_cell/UcMYnCW3">fuel cell</a> electrolyte has several advantages. The elevated temperature increases the kinetic rates of the fuel cell reactions. It also can reduce the problem of the <a href="/facts/Catalyst_poisoning/mU3dwzez">catalyst poisoning</a> by adsorbed <a href="/facts/Carbon_monoxide/CKuLtEMJ">carbon monoxide</a> and it minimizes problems due to electrode flooding.<a class="footnote-ref" id="fnref:31" href="#fn:31"><sup>31</sup></a> PBI/H3PO4 is conductive even in low relative humidity and it allows less crossover of the methanol at the same time.<a class="footnote-ref" id="fnref:32" href="#fn:32"><sup>32</sup></a> These contribute PBI/H3PO4 to be superior to some traditional polymer electrolytes such as <a href="/facts/Nafion/Lnhpg5WM">Nafion</a>. Additionally, PBI/H3PO4 maintains good mechanical strength and toughness.<a class="footnote-ref" id="fnref:33" href="#fn:33"><sup>33</sup></a> Its modulus is three order of magnitudes greater than that of <a href="/facts/Nafion/Lnhpg5WM">Nafion</a>.<a class="footnote-ref" id="fnref:34" href="#fn:34"><sup>34</sup></a> This means that the thinner films can be used, thus reducing ohmic loss. </p> <h3>Asbestos replacement</h3> <p>Previously, only <a href="/facts/Asbestos/dEnjQyee">asbestos</a> could perform well in high-temperature gloves for uses such as foundries, <a href="/facts/Aluminium/7wmR8jYE">aluminium</a> extrusion, and metal treatment. However, trials have been performed which show that PBI adequately functions as an asbestos replacement. Moreover, a safety garment manufacturer reported that gloves containing PBI outlasted <a href="/facts/Asbestos/dEnjQyee">asbestos</a> by two to nine times with an effective cost.<a class="footnote-ref" id="fnref:35" href="#fn:35"><sup>35</sup></a> Gloves containing PBI fibers are softer and more supple than those made of <a href="/facts/Asbestos/dEnjQyee">asbestos</a>, offering the worker greater mobility and comfort, even if the <a href="/facts/Fabric/PJrVeM5S">fabric</a> becomes charred.[<i>dubious – discuss</i>] Further, PBI fiber avoids the <a href="/facts/Chronic_toxicity/gUoq4N0g">chronic toxicity</a> problems associated with <a href="/facts/Asbestos/dEnjQyee">asbestos</a> because it is processed on standard <a href="/facts/Textile/PJrVeM5S">textile</a> and glove fabricating equipment.<a class="footnote-ref" id="fnref:36" href="#fn:36"><sup>36</sup></a> PBI can also be a good substitute for asbestos in several areas of glass manufacturing. </p> <h3>Flue gas filtration</h3> <p>PBI's chemical, thermal and physical properties demonstrate that it can be a promising material as a flue gas filter fabric for coal-fired boilers. Few fabrics can survive in the acidic and high-temperature environment encountered in coal-fired boiler flue gas.<a class="footnote-ref" id="fnref:37" href="#fn:37"><sup>37</sup></a> The filter bags also must be able to bear the abrasion from the periodic cleaning to remove accumulated dust. PBI fabric has a good abrasion resistance property. The acid and abrasion resistance and thermal stability properties make PBI a competitor for this application. </p> <h2 id="appendix-of-properties">Appendix of properties</h2> <h3>PBI fiber characteristics</h3> <p>The chemical formula of poly[2,2’-(m-phenylen)-5,5’ bibenzimidazol] (PBI) is believed to be: ([NH-C=CH-C=CH-CH=C-N=C-]2-[C=CH-C=CH-CH=CH-])n OR (C20N4H12)n of <a href="/facts/Molar_mass/m2laJErl">Molar mass</a> 308.336 ± 0.018 <a href="/facts/Gram/sRSW5RJb">g</a>/<a href="/facts/Mole_(unit)/kCMFwCc0">mol</a>. </p> <h3>Chemical resistance</h3> <table><tbody><tr><th>Chemical Resistance</th><th>Grade</th></tr><tr><td>Acids - concentrated</td><td>Poor</td></tr><tr><td>Acids - dilute</td><td>Fair-Poor</td></tr><tr><td>Alcohols</td><td>Good</td></tr><tr><td>Alkalis</td><td>Good-Poor</td></tr><tr><td>Aromatic hydrocarbons</td><td>Good</td></tr><tr><td>Greases and Oils</td><td>Good</td></tr><tr><td>Halogenated Hydrocarbons</td><td>Good</td></tr><tr><td>Ketones</td><td>Good</td></tr></tbody></table> <p>It is dyeable to dark shades with basic dyes following caustic pretreatment and resistant to most chemicals. </p> <h3>Electrical properties</h3> <table><tbody><tr><th>Electrical</th><th>Properties</th></tr><tr><td>Dielectric constant @ 1 MHz</td><td>3.2</td></tr><tr><td>Dielectric strength</td><td>21 kV·mm−1</td></tr><tr><td>Volume resistivity</td><td>8x1014 Ω·cm</td></tr></tbody></table> <p>Features low electrical conductivity and low static electricity buildup. </p> <h3>Mechanical properties</h3> <table><tbody><tr><th>Mechanical</th><th>Properties</th></tr><tr><td>Coefficient of friction</td><td>0.19-0.27</td></tr><tr><td>Compressive modulus</td><td>6.2 GPa</td></tr><tr><td>Compressive strength</td><td>400 MPa</td></tr><tr><td>Elongation at break</td><td>3%</td></tr><tr><td>Hardness - Rockwell</td><td>K115</td></tr><tr><td>Izod impact strength</td><td>590 J·m−1 unnotched</td></tr><tr><td>Poisson's ratio</td><td>0.34</td></tr><tr><td>Tensile modulus</td><td>5.9 GPa</td></tr><tr><td>Tensile strength</td><td>160 MPa</td></tr></tbody></table> <p>Features abrasion resistance. </p> <h3>Physical properties</h3> <table><tbody><tr><th>Physical</th><th>Properties</th></tr><tr><td><a href="/facts/Char_(chemistry)/YrRbu7xh">Char</a> Yield (under <a href="/facts/Pyrolysis/h1cEegI7">pyrolysis</a>)</td><td>High</td></tr><tr><td>Density</td><td>1.3 g/cm3</td></tr><tr><td>Flammability</td><td>Does not burn</td></tr><tr><td>Limiting oxygen index</td><td>58%</td></tr><tr><td>Radiation resistance</td><td>Good</td></tr><tr><td>Water absorption - over 24 hours</td><td>0.4%</td></tr></tbody></table> <p>Additional features: will not ignite or smolder (burn slowly without flame), <a href="/facts/Mildew/wVos4nxG">mildew</a>- and age-resistant, resistant to sparks and welding spatter. </p> <h3>Thermal properties</h3> <table><tbody><tr><th>Thermal</th><th>Properties</th><th>Grade</th></tr><tr><td>Coefficient of thermal expansion</td><td>23×10−6·K−1</td><td>Low</td></tr><tr><td>Heat-deflection temperature - 0.45 MPa</td><td>435 °C (815 °F)</td><td>High</td></tr><tr><td><a href="/facts/Thermal_conductivity/qWnSG3nQ">Thermal conductivity</a> @ 23 °C (73 °F)</td><td>0.41 W·m−1·K−1</td><td>Low</td></tr><tr><td>Upper working temperature</td><td>260–400 °C (500–752 °F)</td><td>High</td></tr></tbody></table> <p>Other features: continuous temperature: 540 °C (1,004 °F), does not melt but degrades around the temperature: 760 °C (1,400 °F) under pyrolysis, retains fiber integrity and suppleness up to 540 °C (1,004 °F). </p> <h2 id="external-links">External links</h2> <ul><li><a href="http://www.goodfellow.com/E/Polybenzimidazole.HTML">Polybenzimidazole (PBI) - Material Information</a></li> <li><a href="https://web.archive.org/web/20121014002056/http://www.hos-tec.com/pbi-systems.html">Summary of Polybenzimidazole</a></li> <li><a href="https://web.archive.org/web/20160601114338/http://www.pbiproducts.com/polymers/downloads/innovation-lab">PBI Polymer Performance Study</a></li></ul> <h2 id="references">References</h2> <ol> <li id="fn:1"><p>"Polybenzimidazole - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2022-07-08. <a href="https://www.sciencedirect.com/topics/earth-and-planetary-sciences/polybenzimidazole#:~:text=Polybenzimidazole-Based%20Membranes&text=It%20is%20a%20fully%20aromatic,greater%20than%20600%20%C2%B0C." target="_blank">https://www.sciencedirect.com/topics/earth-and-planetary-sciences/polybenzimidazole#:~:text=Polybenzimidazole-Based%20Membranes&text=It%20is%20a%20fully%20aromatic,greater%20than%20600%20%C2%B0C.</a> <a href="#fnref:1" class="footnote-back-ref">↩</a></p></li> <li id="fn:2"><p>"Polybenzimidazoles". Retrieved 18 April 2022. <a href="https://patents.google.com/patent/US2895948A" target="_blank">https://patents.google.com/patent/US2895948A</a> <a href="#fnref:2" class="footnote-back-ref">↩</a></p></li> <li id="fn:3"><p>Leonard, Nelson. "A Biographic Memoir of Carl Shipp Marvel" (PDF). National Academy of Sciences. Retrieved 13 February 2014. <a href="http://www.nasonline.org/publications/biographical-memoirs/memoir-pdfs/marvel-carl.pdf" target="_blank">http://www.nasonline.org/publications/biographical-memoirs/memoir-pdfs/marvel-carl.pdf</a> <a href="#fnref:3" class="footnote-back-ref">↩</a></p></li> <li id="fn:4"><p>"PBI History". Archived from the original on 3 March 2016. Retrieved 14 February 2014. <a href="https://web.archive.org/web/20160303220529/http://itech.dickinson.edu/chemistry/?p=685" target="_blank">https://web.archive.org/web/20160303220529/http://itech.dickinson.edu/chemistry/?p=685</a> <a href="#fnref:4" class="footnote-back-ref">↩</a></p></li> <li id="fn:5"><p>Haertsch, Emilie; Meyer, Michal (2016). "Tough Stuff". Distillations. 2 (2): 12–13. Retrieved 26 March 2018. <a href="https://www.sciencehistory.org/distillations/magazine/tough-stuff" target="_blank">https://www.sciencehistory.org/distillations/magazine/tough-stuff</a> <a href="#fnref:5" class="footnote-back-ref">↩</a></p></li> <li id="fn:6"><p>Haertsch, Emilie; Meyer, Michal (2016). "Tough Stuff". Distillations. 2 (2): 12–13. Retrieved 26 March 2018. <a href="https://www.sciencehistory.org/distillations/magazine/tough-stuff" target="_blank">https://www.sciencehistory.org/distillations/magazine/tough-stuff</a> <a href="#fnref:6" class="footnote-back-ref">↩</a></p></li> <li id="fn:7"><p>Haertsch, Emilie; Meyer, Michal (2016). "Tough Stuff". Distillations. 2 (2): 12–13. Retrieved 26 March 2018. <a href="https://www.sciencehistory.org/distillations/magazine/tough-stuff" target="_blank">https://www.sciencehistory.org/distillations/magazine/tough-stuff</a> <a href="#fnref:7" class="footnote-back-ref">↩</a></p></li> <li id="fn:8"><p>Statement of Hon. Grant L. Hansen, Assistant Secretary of the Air Force (Research and Development), Department of Defense Appropriations for Fiscal Year 1972, p. 612. <a href="https://babel.hathitrust.org/cgi/pt?id=uc1.31210017813369;view=1up;seq=618" target="_blank">https://babel.hathitrust.org/cgi/pt?id=uc1.31210017813369;view=1up;seq=618</a> <a href="#fnref:8" class="footnote-back-ref">↩</a></p></li> <li id="fn:9"><p>Bhuiyan AL (1982). Some problems encountered with degradation mechanisms of addition polymers (in Synthesis and degradation, rheology and extrusion). Berlin u.a.: Springer. ISBN 978-3-540-11774-2. <a href="978-3-540-11774-2" target="_blank">978-3-540-11774-2</a> <a href="#fnref:9" class="footnote-back-ref">↩</a></p></li> <li id="fn:10"><p>Iwakura, Yoshio; Uno, Keikichi; Imai, Yoshio (June 1964). "Polyphenylenebenzimidazoles". Journal of Polymer Science Part A: General Papers. 2 (6): 2605–2615. doi:10.1002/pol.1964.100020611. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:10" class="footnote-back-ref">↩</a></p></li> <li id="fn:11"><p>Varma, I. K.; Veena (April 1976). "Effect of structure on properties of aromatic-aliphatic polybenzimidazoles". Journal of Polymer Science: Polymer Chemistry Edition. 14 (4): 973–980. Bibcode:1976JPoSA..14..973V. doi:10.1002/pol.1976.170140417. <a href="/wiki/Bibcode_(identifier)" target="_blank">/wiki/Bibcode_(identifier)</a> <a href="#fnref:11" class="footnote-back-ref">↩</a></p></li> <li id="fn:12"><p>Vogel, Herward; Marvel, C. S. (April 1961). "Polybenzimidazoles, new thermally stable polymers". Journal of Polymer Science. 50 (154): 511–539. Bibcode:1961JPoSc..50..511V. doi:10.1002/pol.1961.1205015419. <a href="/wiki/Bibcode_(identifier)" target="_blank">/wiki/Bibcode_(identifier)</a> <a href="#fnref:12" class="footnote-back-ref">↩</a></p></li> <li id="fn:13"><p>van Krevelen, Dirk W. (30 March 1972). "New developments in the field of flame-resistant fibres". Angewandte Makromolekulare Chemie. 22 (1): 133–157. doi:10.1002/apmc.1972.050220107. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:13" class="footnote-back-ref">↩</a></p></li> <li id="fn:14"><p>Demartino, R. N. (1 August 1984). "Comfort Properties of Polybenzimidazole Fiber". Textile Research Journal. 54 (8): 516–521. doi:10.1177/004051758405400803. S2CID 135852154. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:14" class="footnote-back-ref">↩</a></p></li> <li id="fn:15"><p>Chung, Tai-Shung (1 May 1997). "A Critical Review of Polybenzimidazoles". Polymer Reviews. 37 (2): 277–301. doi:10.1080/15321799708018367. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:15" class="footnote-back-ref">↩</a></p></li> <li id="fn:16"><p>Kricheldorf, Hans R., ed. (1992). Handbook of polymer synthesis (dernière ed.). New York: Marcel Dekker. ISBN 978-0-8247-8514-7. <a href="978-0-8247-8514-7" target="_blank">978-0-8247-8514-7</a> <a href="#fnref:16" class="footnote-back-ref">↩</a></p></li> <li id="fn:17"><p>Kricheldorf, Hans R., ed. (1992). Handbook of polymer synthesis (dernière ed.). New York: Marcel Dekker. ISBN 978-0-8247-8514-7. <a href="978-0-8247-8514-7" target="_blank">978-0-8247-8514-7</a> <a href="#fnref:17" class="footnote-back-ref">↩</a></p></li> <li id="fn:18"><p>Belohlav, Leo R. (10 December 1974). "Polybenzimidazole". Angewandte Makromolekulare Chemie. 40 (1): 465–483. doi:10.1002/apmc.1974.050400122. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:18" class="footnote-back-ref">↩</a></p></li> <li id="fn:19"><p>Kirshenbaum, edited by Raymond B. Seymour, Gerald S. (1987). High Performance Polymers: Their Origin and Development Proceedings of the Symposium on the History of High Performance Polymers at the American Chemical Society Meeting held in New York, April 15-18, 1986. Dordrecht: Springer Netherlands. ISBN 978-94-011-7075-8. {{cite book}}: |first= has generic name (help)CS1 maint: multiple names: authors list (link) <a href="978-94-011-7075-8" target="_blank">978-94-011-7075-8</a> <a href="#fnref:19" class="footnote-back-ref">↩</a></p></li> <li id="fn:20"><p>Sandor, R.B. (1990). "PBI (Polybenzimidazole): Synthesis, Properties and Applications". High Performance Polymers. 2 (1): 25–37. doi:10.1177/152483999000200103. S2CID 135830459. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:20" class="footnote-back-ref">↩</a></p></li> <li id="fn:21"><p>Li, Qingfeng; Jensen, Jens Oluf; Savinell, Robert F.; Bjerrum, Niels J. (May 2009). "High temperature proton exchange membranes based on polybenzimidazoles for fuel cells" (PDF). Progress in Polymer Science. 34 (5): 449–477. doi:10.1016/j.progpolymsci.2008.12.003. <a href="https://orbit.dtu.dk/ws/files/4351774/2009%20PBI%20review%20Progress%20in%20Polymer%20Science%2034,%205,%20449-477.pdf" target="_blank">https://orbit.dtu.dk/ws/files/4351774/2009%20PBI%20review%20Progress%20in%20Polymer%20Science%2034,%205,%20449-477.pdf</a> <a href="#fnref:21" class="footnote-back-ref">↩</a></p></li> <li id="fn:22"><p>Kumbharkar, S.C.; Li, K. (October 2012). "Structurally modified polybenzimidazole hollow fibre membranes with enhanced gas permeation properties". Journal of Membrane Science. 415–416: 793–800. doi:10.1016/j.memsci.2012.05.071. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:22" class="footnote-back-ref">↩</a></p></li> <li id="fn:23"><p>Li, Xin; Singh, Rajinder P.; Dudeck, Kevin W.; Berchtold, Kathryn A.; Benicewicz, Brian C. (July 2014). "Influence of polybenzimidazole main chain structure on H2/CO2 separation at elevated temperatures". Journal of Membrane Science. 461: 59–68. doi:10.1016/j.memsci.2014.03.008. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:23" class="footnote-back-ref">↩</a></p></li> <li id="fn:24"><p>Li, Qingfeng; Jensen, Jens Oluf; Savinell, Robert F.; Bjerrum, Niels J. (May 2009). "High temperature proton exchange membranes based on polybenzimidazoles for fuel cells" (PDF). Progress in Polymer Science. 34 (5): 449–477. doi:10.1016/j.progpolymsci.2008.12.003. <a href="https://orbit.dtu.dk/ws/files/4351774/2009%20PBI%20review%20Progress%20in%20Polymer%20Science%2034,%205,%20449-477.pdf" target="_blank">https://orbit.dtu.dk/ws/files/4351774/2009%20PBI%20review%20Progress%20in%20Polymer%20Science%2034,%205,%20449-477.pdf</a> <a href="#fnref:24" class="footnote-back-ref">↩</a></p></li> <li id="fn:25"><p>Kerres, Jochen A.; Xing, Danmin; Schönberger, Frank (15 August 2006). "Comparative investigation of novel PBI blend ionomer membranes from nonfluorinated and partially fluorinated poly arylene ethers". Journal of Polymer Science Part B: Polymer Physics. 44 (16): 2311–2326. Bibcode:2006JPoSB..44.2311K. doi:10.1002/polb.20862. <a href="/wiki/Bibcode_(identifier)" target="_blank">/wiki/Bibcode_(identifier)</a> <a href="#fnref:25" class="footnote-back-ref">↩</a></p></li> <li id="fn:26"><p>Sandor, R.B. (1990). "PBI (Polybenzimidazole): Synthesis". High Performance Polymers. 2 (1): 25–37. doi:10.1177/152483999000200103. S2CID 135830459. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:26" class="footnote-back-ref">↩</a></p></li> <li id="fn:27"><p>Sandor, R.B. (1990). "PBI (Polybenzimidazole): Synthesis, Properties and Applications". High Performance Polymers. 2 (1): 25–37. doi:10.1177/152483999000200103. S2CID 135830459. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:27" class="footnote-back-ref">↩</a></p></li> <li id="fn:28"><p>Samms, S. R. (1996). "Thermal Stability of Proton Conducting Acid Doped Polybenzimidazole in Simulated Fuel Cell Environments". Journal of the Electrochemical Society. 143 (4): 1225–1232. Bibcode:1996JElS..143.1225S. doi:10.1149/1.1836621. <a href="/wiki/Bibcode_(identifier)" target="_blank">/wiki/Bibcode_(identifier)</a> <a href="#fnref:28" class="footnote-back-ref">↩</a></p></li> <li id="fn:29"><p>Pingitore AT, Huang F, Qian G, Benicewicz, BC (February 2019). "Durable High Polymer Content m/p-Polybenzimidazole Membranes for Extended Lifetime Electrochemical Devices". ACS Applied Energy Materials. 2 (3): 1720–1726. doi:10.1021/acsaem.8b01820. S2CID 140074080. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:29" class="footnote-back-ref">↩</a></p></li> <li id="fn:30"><p>Wainright JS, Wang JT, Weng D, Savinell RF, Litt, M (July 1995). "Acid-doped polybenzimidazoles: A new polymer electrolyte". Journal of the Electrochemical Society. 142 (7): L121–L123. Bibcode:1995JElS..142L.121W. doi:10.1149/1.2044337. <a href="/wiki/Bibcode_(identifier)" target="_blank">/wiki/Bibcode_(identifier)</a> <a href="#fnref:30" class="footnote-back-ref">↩</a></p></li> <li id="fn:31"><p>Samms, S. R. (1996). "Thermal Stability of Proton Conducting Acid Doped Polybenzimidazole in Simulated Fuel Cell Environments". Journal of the Electrochemical Society. 143 (4): 1225–1232. Bibcode:1996JElS..143.1225S. doi:10.1149/1.1836621. <a href="/wiki/Bibcode_(identifier)" target="_blank">/wiki/Bibcode_(identifier)</a> <a href="#fnref:31" class="footnote-back-ref">↩</a></p></li> <li id="fn:32"><p>Zhao, T.S., ed. (2009). Micro fuel cells : principles and applications. Burlington, MA: Academic Press. ISBN 9780123747136. <a href="9780123747136" target="_blank">9780123747136</a> <a href="#fnref:32" class="footnote-back-ref">↩</a></p></li> <li id="fn:33"><p>Zhao, T.S., ed. (2009). Micro fuel cells : principles and applications. Burlington, MA: Academic Press. ISBN 9780123747136. <a href="9780123747136" target="_blank">9780123747136</a> <a href="#fnref:33" class="footnote-back-ref">↩</a></p></li> <li id="fn:34"><p>Buckley, A (1988). Encyclopedia of Polymer Science And Engineering. New York: John Wiley & Sons. <a href="#fnref:34" class="footnote-back-ref">↩</a></p></li> <li id="fn:35"><p>Coffin, D.R.; Serad, G.A.; Hicks, H.L.; Montgomery, R.T. (1 July 1982). "Properties and Applications of Celanese PBI--Polybenzimidazole Fiber". Textile Research Journal. 52 (7): 466–472. doi:10.1177/004051758205200706. S2CID 137526306. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:35" class="footnote-back-ref">↩</a></p></li> <li id="fn:36"><p>Celanese. "PBI in High Temperature Protective Gloves" (PDF). Retrieved 9 March 2014. <a href="http://legacy.library.ucsf.edu/documentStore/d/f/w/dfw88h00/Sdfw88h00.pdf" target="_blank">http://legacy.library.ucsf.edu/documentStore/d/f/w/dfw88h00/Sdfw88h00.pdf</a> <a href="#fnref:36" class="footnote-back-ref">↩</a></p></li> <li id="fn:37"><p>Hearle, J.W.S., ed. (2004). High-performance fibres (Repr. ed.). Boca Raton, Fla. [u.a.]: CRC Press. ISBN 978-1855735392. <a href="978-1855735392" target="_blank">978-1855735392</a> <a href="#fnref:37" class="footnote-back-ref">↩</a></p></li> </ol>